Blog
News, tips and tool spotlights from our e-shop eshop.marosko.sk.
On this blog you'll find practical tips, how-tos and spotlights on new arrivals from our range of woodcarving and woodworking tools. Every article links straight through to the original post on eshop.marosko.sk, where you can also buy the product directly.
Saburrtooth USA Shank Burrs – a Guide to Shapes and Grits
An overview of the American Saburrtooth shank burrs – shapes, color-coded grits, and practical uses for carvers, sculptors, and modelers.
More info →
Manpa Eye-Shaping Burrs – Set of 8
A set of 8 tools for shaping and fine-burning eyes, scales, and decorative rings on wooden figures – no more tedious hand-carving.
More info →
Manpa EZ Sander 65 mm – Flap Sanding Wheel
A flexible sanding attachment for smoothing uneven surfaces, hollows, and rounded shapes – it flexes to match the workpiece.
More info →
Choosing Chisels for Beginners (M-stein)
A set of hand chisels optimized for smaller projects and beginner carvers, from a Slovak manufacturer.
More info →
Stubai – 4-Piece Beginner Chisel Set
A high-quality 4-piece Austrian chisel set suited for figures, relief carving, or hobby carving, in a practical roll-up pouch.
More info →
Arbortech Mini Grinder MG1000 – Cordless Set
A cordless carving tool with a brushless motor for detailed woodwork, part of the "Woodworking Pack" set.
More info →
Silverline Polisher, 180 mm, 1200 W
A powerful polisher with a 180 mm pad and variable speed control (600–3500 rpm), suited for polishing and sanding metal, wood, and lacquered surfaces.
More info →
Arbortech Power Chisel – Electric Chisel, 7-Piece Set
A new-generation electric chisel combining the power of an electric drive with the finesse of hand woodcarving. A 7-piece set with quick blade changes, suited for detail carving and heavier stock removal alike.
More info →
Arbortech Contour Random Sander
A random-orbital sander developed specifically for sanding irregular shapes and curves – the rotating and vibrating motion complement each other so the grit never passes over the same spot twice. The proven Contour Sander got an upgrade: fiber discs mounted with a center screw replaced the original cloth sanding sleeves.
More info →
Arbortech Turbo Scraper 100 mm
The specially designed disc cuts at a negative angle and glides smoothly across the wood – minimizing tear-out and delivering clean results even on demanding projects. Rather than removing material, it smooths the surface much like a glass scraper; the teeth can be rotated once dull, giving the tool an exceptionally long lifespan.
More info →
Arbortech SpheroPlane
Shape a wooden bowl or sphere without a lathe – SpheroPlane attaches to your angle grinder and has an adjustable cutting radius for both small and large projects. It comes with a sanding system for finishing the surface, and works with any standard 115/125 mm angle grinder as well as the Arbortech Power Carving Unit.
More info →
Arbortech Turbo Plane
A revolutionary tool that combines a plane, router, and sander in one compact device for cutting, shaping, and finishing wood. Adjustable angle and cutting depth allow precise work, while a protective guard and anti-kickback system keep it safe to use.
More info →
Manpa 3-Wing Triangular Profile Cutter, Ø 100 mm
The pointed, sharp-contoured profile lets you carve precise waves, grooves, and fine textures in a single pass – ideal for imitating hair, fur, or other detailed textures. The new 100 mm version (22 mm bore) mounts directly on a standard angle grinder, no adapter needed.
More info →
Arbortech Woodcarver PROFI-INDUSTRIAL Carving Disc
A carbide disc with replaceable rotating teeth and 25× longer lifespan, suited for hard and soft wood, laminate, and plastics.
More info →
Polisher Shaft for Discs
A universal disc mandrel with an M14 thread that turns an angle grinder or polisher into a FlexTrim disc polishing system. Suited for finishing large curved surfaces. Specs: M14 thread, 50 mm clamping diameter, 118 mm length, 1.8 kg.
More info →
Polishing System (FlexTrim Bristle Polishing Disc)
An industrial FlexTrim polishing disc adapted for craft work – quickly and effectively polishes large flat and curved surfaces. Disc diameter 30 cm, width 12 cm, M14 mount. An extension shaft for better reach is included in the set.
More info →
Bell-Shaped Hollowing Cutters
Specialized bell-shaped cutters for creating deep hollows and rounded recesses in wood – ideal for artistic wood carving, bowls, seats, or decorative elements. Compatible with Manpa tools; recommended for use with the Grinder Holder extension. Diameters from 45 mm to 75 mm.
More info →
Sanding Paper – Custom-Cut Discs
Custom-cut sanding discs for grinders with a diameter from 50 mm up to 600 mm – a solution for anyone with a grinder that takes an unusually large disc.
More info →
Saburrtooth Extreme Burrs
A new premium EXTREME line from SaburrTooth USA – router bits with a more aggressive tooth profile for maximum material removal, while keeping the brand's legendary durability. Two new grits: Mega (blue coating) and Giga (purple coating). Built for professionals on large projects.
More info →
Arbortech Power Carving Unit
An electric grinder from Arbortech, designed in-house specifically to get the most out of the entire Arbortech accessory range (cutting, planing, sanding, milling). Fitted with an anti-vibration handle and soft start, with variable speed for all-round use.
More info →
Grooving Milling Bit, 20 mm Diameter
Manpa Crack Cutter – a milling bit for an angle grinder with a 20 mm diameter and 200 mm overall length. Suited for precise grooves for joining boards, inlaying glass, or decorative purposes, and for working in narrow, hard-to-reach spots.
More info →
Toothed rasp disc for Arbortech Mini Grinder and Merlin, 50 mm
Hand-cut 50 mm rasp disc for the Arbortech Mini Grinder, Mini Carver and Merlin. Ideal for fast, aggressive shaping, rough carving and texturing wood.
More info →
Finishing Sanding Mop
A soft, flexible sanding mop made from 6 layers of non-woven abrasive fabric (Scotch-Brite) – ideal for fine sanding and polishing rounded, curved, and oval shapes. Works on wood, metal, plastic, and composites.
More info →
Extension Arm with Multi-Purpose Attachment
Manpa Multicutter Master – an extension arm for angle grinders for working in hard-to-reach, narrow spaces. Improves safety (a safe distance from the spinning disc), easy to install, rugged corrosion-resistant components, and quick accessory changes.
More info →
Arbortech Mini Carver 1000W – Electric Carver
A powerful electric carving tool with 6-speed control (6,000–18,000 rpm), the successor to the Mini Grinder, with dust extraction and low vibration.
More info →
Rustic Wood Effect (Wire Brush Wheel)
An arbor for wire-ring segments that mounts directly onto an angle grinder and turns it into a wood wire-brushing tool – no need to buy a separate machine. Slide the required number of brush rings onto the shaft, separated by spacers, then tighten to lock the segment against slipping.
More info →
Straight Grinder 500 W (Extol)
Extol Premium straight grinder with 500 W power and a no-load speed of 28,000 rpm, 6 mm collet, weighing about 1.6 kg. Suited for carving, shaping, and working wood, plastics, and rubber – from rough shaping to fine details, sculptures, busts, and relief carving.
More info →
Hook-and-Loop Backing Pads – Made to Order
A clean, reusable way to attach sanding discs – both the hook and adhesive sides cut to your exact diameter.
More info →
Angle Grinder Shaft Extension, M14 – M14
An M14/M14 threaded extension that lets you use tools further away from the angle grinder's body – handy for tight angles or reaching greater depths, e.g. on deeper bowls or vases.
More info →
M14 to 6 mm Adapter (Reducer)
A metal reducer/adapter with an M14 thread for angle grinders and a 6 mm bore – lets you fit smaller shank tools (e.g. needle rasps, fine sanding discs, polishing pads) that are normally made for a drill. Simple screw-on installation, made from quality steel.
More info →
Grooved diamond grinding disc, grit 126/39
Grooved diamond grinding disc with two grits and a self-cooling effect. Universal mounting for angle grinders and drills — for sharpening carbide, steel, ceramics and glass.
More info →
Hand-cut rasp disc, flat with rounded edge, 125 mm
Hand-cut 125 mm rasp disc — flat with a rounded edge. Extreme wood removal, ideal for shaping, debarking and stripping old finishes with an angle grinder.
More info →
Hand-cut mini rasp
Hand-cut Ø 50 mm mini rasp made of hardened steel for Arbortech, Proxxon, Merlin and Parkside mini carvers. For wood shaping, carving and rough stock removal.
More info →
Angled convex needle rasp disc without holes, Ø 100 mm, rough
Saburrtooth carbide needle rasp disc, angled convex without holes, Ø 100 mm, rough grit. Works on wood, laminate, plastics, rubber, paints and finishes — long life, clog-resistant.
More info →
Angled convex needle rasp disc without holes, fine, 100 mm
Angled convex needle rasp disc without holes, Ø 100 mm, fine grit. For fine shaping of wood, chipboard, laminate, plastics and more with an angle grinder.
More info →
Flat Straight Needle Rasp, Ø 100 mm, Extra Coarse (Orange)
An extra coarse needle rasp from Saburrtooth (USA), 100 mm diameter, max. 14,000 rpm. The flat shape is ideal for working on flat surfaces (boards, planks). Extreme material removal, long-lasting carbide needles. Suited for wood, laminate, plastics, and rubber – not for metal or stone.
More info →
Angled convex needle rasp disc without holes, Ø 100 mm, extra coarse
Angled convex needle rasp disc without holes, Ø 100 mm, extra coarse (orange). Maximum stock removal when roughing out wood with an angle grinder.
More info →
Convex needle rasp disc without holes, Ø 100 mm, fine
Convex needle rasp disc without holes, Ø 100 mm, fine grit. Universal use on wood, laminate, plastics, polyurethane and fillers — a smooth finish without burning.
More info →
Recessed Fine Flat Rasp Disc, 115 mm (KZR-53)
The KZR-53 rasp disc, 115 mm diameter, 22.2 mm arbor. Its recessed flat shape lets you grind right up to the edge without the clamping nut getting in the way. Fine cut – suited for stripping paint, varnish, and adhesives without damaging the surface underneath, on wood, plastics, fiberglass, rubber, and leather. Not suited for aerated concrete.
More info →
Cylindrical rasp 120 × 20 × 222 mm, KVO 122
Cylindrical rasp 120 × 20 × 222 mm (KVO 122) for sanding and shaping wood surfaces, removing under-bark layers and cleaning weathered or painted wood.
More info →
Recessed rasp saw disc 125 mm
Recessed 125 mm rasp saw disc (KUZ-64) — cuts and shapes in one tool. Saw teeth on the rim, rasp teeth on the face; for wood, plastics and aerated concrete.
More info →
Ball Gouge replacement blade
Genuine replacement blade for the Arbortech Ball Gouge hollowing carver. Hardened steel, 30 mm diameter, quick swap of a worn cutting edge.
More info →
Hand-cut rasp discs
Hand-cut rasp discs for angle grinders on wood. Extreme stock removal, 40 HRC hardened steel, a solid and safe design for grinders from 850 W up.
More info →
Hand-cut rasp disc with rounded edge, 125 mm, oval
Hand-cut 125 mm rasp disc, oval with a rounded edge (U profile). Ideal for grooves, flutes and shaping rounded surfaces in wood.
More info →
Hand-cut rasp disc with sharp edge, 125 mm, V profile
Hand-cut 125 mm rasp disc with a sharp V-profile edge. For flat surfaces, modelling, grooving and carpentry work on log buildings.
More info →
Turboshaft Milling Bit
Arbortech's 20 mm Turboshaft milling bit for detailed freehand shaping, hollowing, and grooving of wood. Two replaceable, indexable carbide cutting teeth, adjustable depth stop, and a longer, narrower shaft for working deep, narrow profiles. Fits 100/115 mm angle grinders, minimum 9,000 rpm.
More info →
Round Needle Rasp, No Holes, Ø 100 mm, Coarse (Green)
A professional coarse needle rasp from Saburrtooth (USA), 100 mm diameter, for angle grinders, max. 14,000 rpm. Coarse grit for fast material removal, long-lasting carbide needles, with gaps between needles that prevent overheating and scorching the wood. Suited for wood, laminate, plastics, and rubber – not for metal or stone.
More info →
Convex needle rasp disc without holes, Ø 100 mm, rough
Convex needle rasp disc without holes, Ø 100 mm, rough grit. Long-lasting carbide needles for aggressive wood shaping with an angle grinder.
More info →